Tuesday, February 17, 2015

Simatic Step7 - 300

Features
• Modular small control system for the lower performance range
• Performance-graded range of CPUs
• Extensive selection of modules
• Expandable design with up to 32 modules
• Backplane bus integrated in the modules
• Can be networked with - Multipoint interface (MPI),
- PROFIBUS or
- Industrial Ethernet.
• Central PG/PC connection with access to all modules
• No slot restrictions
• Configuration and parameter setting with the help of the "HWConfig" tool.




Simatic Step7 - 300 Modules

Signal Modules (SM)
• Digital input modules: 24 VDC, 120/230 VAC
• Digital output modules: 24 VDC, Relay
• Analog input modules: Voltage, current,
resistance, thermocouple
• Analog output modules: Voltage, current

Interface Modules (IM)
The IM360/IM361 and IM365 make multi-tier configurations possible. The interface modules loop the bus from one tier to the next.

Dummy Modules (DM)
The DM 370 dummy module reserves a slot for a signal module whose parameters have not yet been assigned. A dummy module can also be used, for example, to
reserve a slot for installation of an interface module at a later date.

Function Modules (FM)
Perform "special functions":
-Counting
- Positioning
- Closed-loop control.

Communication Processors (CP)
Provide the following networking facilities:
- Point-to-Point connections
- PROFIBUS
- Industrial Ethernet.

Accessories
Bus connectors and front connectors



Simatic Step7 CPU Design

Mode Selector
MRES = Memory reset function (Module Reset)
STOP = Stop mode, the program is not executed.
RUN = Program execution, read-only access possible from PG.
RUN-P = Program execution, read/write access possible from PG.

Status Indicators (LEDs)
SF = Group error; internal CPU fault or fault in module with diagnostics capability.
BATF = Battery fault; battery empty or non-existent.
DC5V = Internal 5 VDC voltage indicator.
FRCE = FORCE; indicates that at least one input or output is forced.
RUN = Flashes when the CPU is starting up, then a steady light in Run
mode.
STOP = Shows a steady light in Stop mode.
Flashes slowly for a memory reset request,
Flashes quickly when a memory reset is being carried out,
Flashes slowly when a memory reset is necessary because a
memory card has been inserted.

Memory Card
A slot is provided for a memory card. The memory card saves the program
contents in the event of a power outage without the need for a battery.

Battery Compartment
There is a receptacle for a lithium battery under the cover. The battery provides
backup power to save the contents of the RAM in the event of a power outage.

MPI Connection
Connection for a programming device or other device with an MPI interface.

DP Interface
Interface for direct connection of distributed I/Os to the CPU.


2 comments:

  1. Bạn có thể tham khảo những thông tin liên qua mới nhất dưới đây:
    võng xếp duy phương thegioivong.vn
    đệm bông ép sông hồng thegioidembongep.com
    bảng giá đệm bông ép everon thegioidembongep.com

    ReplyDelete
  2. bài viết rất hay, rất hữu ích cảm ơn bạn đã chia sẻ
    mọi người tham khảo thêm các mẫu ghế massage mới nhất ở đây nhé
    giá ghế massage
    ghế massage nhật
    ghế matxa lưng giá rẻ
    ghế matxa chân giá rẻ
    Gia Dụng Việt chuyên các loại ghế massage toan thân cao cấp chính hãng Việt Nam

    ReplyDelete